ZOLL AutoPulse NXT, User Manual

Page: 32 / 85

Chapter 6. Battery Charger
AutoPulse NXT User Guide 27
6. Battery Charger
This chapter provides information on:
• "Battery charger description" (page 27)
• "Setting up the battery charger" (page 29)
• "Using the battery charger" (page 29)
• "Battery charger panel" (page 31)
• "Battery charger measurement cycle" (page 32)
Battery charger description
The AutoPulse NXT battery charger (battery charger) is used to charge, test, and maintain up to two AutoPulse
NXT batteries. The battery charger has two charging bays, each with its own indicators. When in use, the bat
-
tery charger continuously tests itself and any batteries in its bays.
Properly maintain and fully charge batteries so that they are ready for use before deploying the system.
WARNING. To avoid the risk of electric shock, connect the battery charger only to a supply main with protective
earth.
Caution. Do not use the battery charger in a vehicle.
Caution. Do not block the vents on the bottom and back of the battery charger.
Caution. Do not operate the battery charger in a confined space.
Caution. Do not position the battery charger so that it is difficult to unplug the power cord.
Caution. Keep the battery charger away from moisture.