ZOLL AutoPulse NXT User Manual Download Page 8

Page: 8 / 85

Chapter 1. Introduction

AutoPulse NXT User Guide

AutoPulse NXT Battery

The AutoPulse NXT battery (battery) supplies power to the platform. The battery can be inserted into the plat

form or battery charger.

AutoPulse NXT Battery Charger

The AutoPulse NXT battery charger (battery charger) has two charging bays, each with its own indicators.

AutoPulse NXT Band

The AutoPulse NXT band (band), when connected to a platform, performs automated chest compressions. The
band is for single use only.

Accessories

Optional accessories include:

• "Quick Case™ carry sheet" (page 4

)

• "Hygiene Barrier" (page 5

)

• "Shoulder Restraint" (page 5

)

Adjunctive therapies

The AutoPulse NXT system is interoperable with ZOLL technologies.

Summary of Contents for AutoPulse NXT






















































































Search results

Summary of Contents for AutoPulse NXT

Reviews:

Related manuals for AutoPulse NXT

Brands by name

Popular brands

ZOLL AutoPulse NXT, User Manual

Search results

Summary of Contents for AutoPulse NXT

Reviews:

Related manuals for AutoPulse NXT

Brands by name

Popular brands