background image

© Copyright 2022. All rights reserved.

SEE LIST AT RIGHT 

FOR WARNINGS

Thank you for choosing a Fusion

®

 Series Treatment System. High-quality 

workmanship and easy maintenance have been incorporated into the 

Fusion

®

 system. The system will provide years of trouble-free service 

when maintained according to the manufacturer’s recommendations. 

Please read this manual in its entirety before using the Fusion

®

 and follow 

all instructions to ensure proper operation. Keep this manual for future 

reference along with other important onsite documents. Should further 

assistance be necessary, please contact Zoeller Pump Company at 1-800-

928-7867.

Warning Labels

You will find warning labels on the Fusio

n

®

, riser lids, blower, and the alarm 

control panel. It is very important to follow the information on these labels to 

ensure your safety. Please do not remove these labels.

1. 

DO NOT attempt to service the Fusion

®

 unit yourself. Contact your 

authorized maintenance provider for all service related issues.

2. 

There are buried electrical cables and piping near and around the 

Fusion

®

. Please consult with your authorized maintenance provider to 

locate these utilities before excavation.

3. 

DO NOT bury or cover the Fusion

®

 lids with soil or other debris. This is 

necessary to allow access for operation and maintenance of the unit.

4. 

The Fusion

®

 blower must be unobstructed and vented for proper 

operation. Care must be taken that no grass clippings or other materials 

accumulate on or around the blower and block ventilation.

5. 

DO NOT place heavy objects over the Fusion

®

 or drive heavy equipment 

over the Fusion

®

, as damage may occur. Damage of this kind is not 

covered by the warranty.

6. 

DO NOT plant trees within 15 feet (4.6 m) of the Fusion

®  

Series Treatment 

System.

Fusion

®

 Series Treatment Systems

SECTION: C3.10.142

CL

0169
0122

Supersedes

0517

Product information presented 

here reflects conditions at time 

of  publication. Consult factory 

regarding discrepancies or 

inconsistencies.

MAIL TO

:  P.O. BOX 16347 • Louisville, KY  40256-0347

SHIP TO

:  3649 Cane Run Road  • Louisville, KY  40211-1961

TEL

: (502) 778-2731 • 1 (800) 928-PUMP • 

FAX

: (502) 774-3624

Visit our website:

zoellerpumps.com

OWNER'S MANUAL

Large Commercial Models 

ZFL-2800 & ZFL-4000

Manufacturer warrants, to the purchaser and subsequent owner 
during the warranty period, every new product to be free from defects 
in material and workmanship under normal use and service, when 
properly used and maintained, for a period of two years from date of 
purchase by the end user.  No allowance will be made for shipping 
charges, damages, labor or other charges that may occur due to 
product failure, repair or replacement.

This warranty does not apply to and there shall be no warranty for 
any material or product that has been disassembled without prior 
approval of Manufacturer, subjected to misuse, misapplication, 
neglect, alteration, accident or act of nature; that has not been installed, 
operated or maintained in accordance with Manufacturer's installation 
instructions; that has been exposed to outside substances including 
but not limited to the following:  sand, gravel, cement, mud, tar, 
hydrocarbons, hydrocarbon derivatives (oil, gasoline, solvents, etc.), 
or other abrasive or corrosive substances, wash towels or feminine 
sanitary products, etc. in all pumping applications.  The warranty set 
out in the paragraph above is in lieu of all other warranties expressed 
or implied; and we do not authorize any representative or other person 

to assume for us any other liability in connection with our products.
Contact  Manufacturer at, 3649 Cane Run Road, Louisville, Kentucky  
40211, Attention: Customer Support Department to obtain any needed 
repair or replacement of part(s) or additional information pertaining 
to our warranty.

MANUFACTURER EXPRESSLY DISCLAIMS LIABILITY FOR 

SPECIAL, CONSEQUENTIAL OR INCIDENTAL DAMAGES OR 

BREACH OF EXPRESSED OR IMPLIED WARRANTY; AND ANY 

IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE 

AND OF MERCHANTABILITY SHALL BE LIMITED TO THE 

DURATION OF THE EXPRESSED WARRANTY.

Some states do not allow limitations on the duration of an implied 
warranty, so the above limitation may not apply to you. Some states 
do not allow the exclusion or limitation of incidental or consequential 
damages, so the above limitation or exclusion may not apply to you.

This warranty gives you specific legal rights and you may also have 

other rights which vary from state to state.

LIMITED WARRANTY

Fusion

®

 Model:

 

 

ZFL-2800 

  

 

ZFL-4000

Serial No. 

____________________________________

Installing Contractor 

____________________________________

Phone Number 

____________________________________

Installation Date 

____________________________________

Maintenance Provider’s Name 

_____________________________

Phone Number 

____________________________________

Limited Warranty  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Process Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
System Components and Care. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Installation and Start Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Blower Installation And Placement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Operation and Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Aeration Chamber Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Troubleshooting  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Blower Inspection and Maintenence   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

TABLE OF CONTENTS

Register your 

Zoeller Pump Company Product 

on our website:

http://reg.zoellerpumps.com/

Summary of Contents for Fusion Series





















Reviews: