12
IL1374
Wire from
motor
4
IL1373
Wire from
motor
3
IL1372
2
3. Thread the cable from the pump motor
through the strain relief into the pressure
switch cavity and tighten both screws on the
strain relief. Do not crush wire.
4. Connect the two motor wires of the motor
cable to the two inside terminals on the
pressure switch.
2. Insert an electrical wire strain relief into the
opening in the side of the pressure switch
closest to the motor.
IL1375
Wire from
motor
Ground Screws
5
5. Connect the green ground wire from the
motor cable to one of the green ground
screws at the bottom of the pressure switch.
