10
Tire gauge
Tank
Air Valve/Stem
6
IL1369
Glue
To House
Plumbing
From Pump
Shut off valve
Reducer
Bushing
5
Glue
Tee
Union
1 in. pipe
4
5. Attach the pipe from the pump to the tee
installed in Step 4. Then, from the tee,
install 1 in. pipe and optional shut off valve
(not included) to connect tee to house
plumbing. 1 x 3/4 in reducer bushing may
be required to connect to house plumbing.
6.
IMPORTANT:
Air pressure in the tank
must be 2 PSI lower than the “cut-in” of
the pressure switch. Pump has a 20/40
PSI pressure switch, so tank pressure
must be set at 18 PSI. Locate the air
valve/stem on the tank and check
pressure with a tire gauge (not included).
If air needs to be removed, press down on
valve to bleed off air. Use a tire pump or
air compressor to add air if needed.
4. Attach a 1 in. pipe (not included) to the
reducer bushing. Install an optional 1 in.
union (not included) and continue with pipe
and 1 in. x 1 in. x 1 in. tee (not included).
