background image

Table of Contents

Section 1.  Important Safety Instructions ........ 3

Section 2.  Cleaner Specifications ................... 4

2.1  General Specifications ....................................... 4

Section 3.  Assembly ......................................... 4

3.1 Unpacking .......................................................... 4
3.2  Assembling the Transport Caddy 

(VX50 4WD and VX55 4WD) ............................. 5

3.3  Connecting the Control box to Caddy  

(VX50 4WD / VX55 4WD)  

or Base (VX40 / VX45 4WD) .............................. 7

3.4  Connecting Floating Cable to Control Box ......... 7

Section 4.   Operation ......................................... 8

4.1  Submerging the Cleaner .................................... 9
4.2  The VX40 Cleaner Control box ........................ 10
4.3  The VX45 4WD and VX50 4WD  

Cleaner Control box ......................................... 10

4.4  The VX55 4WD Cleaner Control box ................11
4.5  Starting the Cleaner ..........................................11
4.6  Stopping the Cleaner  

and Removing from the Pool ............................ 12

4.7  Operating the Cleaner with  

the Remote Control (VX55 4WD only) ............. 12

4.8  Synchronizing the Remote Control ................... 13
4.9  Storing the Cleaner  ......................................... 13

Section 5. Programming the Cleaner ............. 14

5.1  Displaying Current Day and Time ..................... 14
5.2  Changing the Clock Day and Time ................... 14
5.3  Changing Default Cleaning Times .................... 14
5.4  Programming Cleaning Cycles ......................... 15
5.5  Canceling Cleaning Cycles .............................. 15

Section 6.   Cleaning and Maintenance .......... 16

6.1  Cleaning the Filter Canister .............................. 16
6.2.  Cord Tangling ................................................... 17
6.3  Replacing the Brushes ..................................... 18
6.4  Replacing the Tyres .......................................... 19

Section 7.  Troubleshooting ........................... 21

7.1  Using the Information LED for  

Troubleshooting (VX40 Cleaner) ...................... 21

7.2  Viewing Cleaner Status Information  

for Troubleshooting (VX45 4WD,  

VX50 4WD, and VX55 4WD) ............................ 21

7.3  General Troubleshooting .................................. 22
7.4  Control Box Error Codes (VX45 4WD,  

VX50 4WD and VX55 4WD) ............................. 23

THANK YOU FOR PURCHASING THIS ROBOTIC POOL CLEANER BY ZODIAC

®

.

YOUR CLEANER HAS BEEN DESIGNED AND MANUFACTURED TO BE EASILY INSTALLED AND TO 

PROVIDE LOW MAINTENANCE OPERATION. A WARRANTY CARD IS SUPPLIED IN THE BOX. PLEASE GO 

TO ZODIAC.COM.AU TO REGISTER FOR WARRANTY.

Taking these steps will help ensure prompt warranty service, should it be required. If service is required, please  

contact your original dealer. If the original dealer does not perform warranty service, please visit  

www.zodiac.com.au to locate an independent service company near you. If you are unable to locate a service  

company, please call our After Sales Support Team at 1300 763 021.

In the case your product may require a service or warranty repair, please retain the original carton to transport your 

cleaner in.

  

 

H0516700_REV C

Summary of Contents for VORTEX-PRO EC15 Series

























Reviews: