background image

GP-M45J-CX-01A 

4005-CB, 4002-CB Manual 

    RD: JUN 2008 

R.L. 02A 

BA 

INSTALLATION / OWNER’S MANUAL 

MODELS:  4002-CB,  

 4005-CB  

INFRARED PORTABLE PATIO HEATER 

Read and understand this installation and operation manual thoroughly prior to assembly, 
installation, operation or service to this appliance. 
 

FOR YOUR SAFETY: 

This heater must only be serviced by a trained gas service technician. Failure to comply 
could result in personal injury, death, fire and/or property damage. 

Do not store or use gasoline or other flammable vapours and liquids in the vicinity of 
this or any other appliance

 

IF YOU SMELL GAS: 



Extinguish any open flame 



Don’t touch any electrical switch, or telephone 



Go to a neighbor and call your gas supplier immediately  



Follow any and all instruction from your gas supplier 



If your gas supplier is not available, call the fire department 

FIELD CONVERTIBILITY:

  This appliance is NOT convertible from propane gas. 

 

Member of  

WARNING 

Keep this manual in a secure place .  
Record the following information for future 
reference

Model #:      4002-CB 
 

      4005-CB 

Serial #:  

 

(located on heater rating label) 

Summary of Contents for 4002-CB

















Reviews: