3.
To install a new brush matt, position the
new brush matt on the roller with the bristles
facing downwards (Figure 35).
3
Figure 35. Install the New Brush
4.
Thread each tab into the slot provided and
gently feed it through until the heel comes out
at the other side of the slot (Figure 36).
4
Figure 36. Pull Tabs Through Each Slot
5.
Use scissors to cut the tabs at the guides, as
shown in Figure 37.
Figure 37. Cut Tabs
6.
Repeat this procedure to replace the second
brush matt.
6.4 Replacing the Tyres
1.
Pull on the inside of the old tyre to remove the
tyre lip from the wheel (Figure 38).
1
Figure 38. Pull the Old Tyre Over the Wheel
2.
Remove the old tyre (Figure 39).
2
Figure 39. Remove the Old Tyre
3.
To replace the tyre, position the tyre on the
wheel making sure to orient the tyre so that the
word INSIDE is toward the body of the cleaner
(Figure 40).
19
H0516700_REV C
