5.4 Programming Cleaning Cycles
You can program up to seven cleaning cycles.
Program cleaning for either seven consecutive cycles or
the same cycle repeated over several weeks
(e.g., every Wednesday and Saturday for three weeks).
1.
Choose pool cleaning settings to program.
All models:
Choose
to select either the pool floor
or the floor and walls of the pool.
VX55 4WD:
• Choose
to select waterline only in
addition to Floor Only or Floor and Walls.
• Choose
to select intensive or
high intensity level cleaning.
• Choose
to select pool shape.
2. Press
to view currrent programmed
cleaning cycles.
Cycle day and time is displayed for three
seconds.
3.
When the cleaning cycle you want to change
is displayed, press and hold
for 3 to 5
seconds.
The days of the week flash twice.
NOTE:
If the display flashes all zeros, the time has
not been set (new cleaner). Day and time must be set
before you can program cleaning times, see section
5.2 Changing the Clock Day and Time
.
4. Press
or
buttons to cycle through
7 days of the week.
5. Press
to select.
Hour setting flashes twice.
6.
Press
or
buttons to cycle
through 24 hours.
7. Press
to select.
Minutes setting flashes zero.
8. Press
or
buttons to cycle
through four 15- minute increments (00, 15, 30,
or 45).
10. Press
to select.
The next day to program flashes.
11. Press
to program an additional cleaning
cycle for a different day
OR
Press to exit the programming menu
Days of the week are lit indicating programs
stored in the control box memory for that day.
5.5 Canceling Cleaning Cycles
To Cancel an Individual Program:
1. Press
and hold for 3 to 5 seconds.
The days of the week flash twice.
2. Press
or
buttons to cycle
through seven (7) days.
NOTE:
If the day of the week flashes with no time
displayed, there is no program set for that day.
15
H0516700_REV C
