Zodiac INDIGO, Manual

Page: 4 / 30

4
1.3. R
OBOT
T
ILTS
B
ACKWARD
The robot tilts backwards at the foot of the sidewall.
POSSIBLE CAUSES CHECKS AND CORRECTIVE ACTION
- The rotor is broken or obstructed by
foreign bodies.
- The robot's suction system is
malfunctioning.
Æ
Remove any hairs, pieces of cloth or foreign
bodies obstructing the rotor or replace the rotor if it
is broken.
Æ
Bring the robot up to just below the water level
and check for backflow at the turbine screen outlet.
If the pump isn't working, ask your supplier for the
necessary after-sales service.
1.4. R
OBOT EMERGING ABOVE THE WATER LINE
The robot is emerging above the waterline and is sucking in air.
POSSIBLE CAUSES CHECKS AND CORRECTIVE ACTION
- The robot is too light because there's
air in it.
- The water level is too high, which
forces the robot to come into contact
with the edging.
- The lining is furred or the pH of the
water is low.
Æ
Turn the robot over to expel the air from the filter
bag and press the foam pads.
Æ
Lower the water level.
Æ
Adjust the pH and clean the waterline.