![background image](http://html1.mh-extra.com/html/zodiac/dual-link/dual-link_instructions-for-installation-and-use-manual_936316022.webp)
21
3.2.3 Installing the POD kit on the pipe
•
For a Ø50 mm pipe, use the adapter labelled "EU". Clip the 2 parts of the POD kit collar together around the
pipe. Make sure that the adapter is properly centred according to the guides; the adapter must stay in this
position once all parts have been assembled. Do not use this adapter for a Ø63 mm pipe,
see figure
.
•
Install the bottom and top collars of the POD kit on the pipe according to the position of the holes and the
water flow direction (follow the arrows),
see figure .
•
Position the top part with its different components in the direction shown by the foolproofing key, align the
point of the compression ring with the arrow of the bottom collar and tighten the compression ring
well (tighten by hand only!),
see figure .
•
To determine whether tightening is correct, check that the compression ring is level,
see figure .
Pipe adapter Ø50 mm (marked "EU")
Bottom collar Ø63
INPUT
OUTPUT
Direction of water flow
Foolproofing key
EN