![background image](http://html1.mh-extra.com/html/zodiac/dual-link/dual-link_instructions-for-installation-and-use-manual_936316057.webp)
56
8.3 I Effects of the stabilising agent on chlorine and ORP
A pool ideally has a stabiliser level of 30 ppm and a pH of 7.4.
1 ppm of free chlorine = 700 mV
The user can therefore adjust the chlorination requirements to 700 mV to maintain a level of 1 ppm in the pool.
If the level of stabiliser rises to 90 ppm, the ORP value will be incorrect.
1 ppm of free chlorine = 500 mV
If the user keeps the setpoint at 700 mV, a chlorine concentration of 5 ppm will eventually be obtained!
CHL
ORINE LEVEL (PPM)
ORP MEASUREMENT (MV)
Variations in the ORP measurement depending
on the stabiliser concentration (pH 7.4, 25°C)*.
Setpoint
Stabiliser level
of 90 ppm
Stabiliser level
of 30 ppm
* Theoretical values for information purposes only. Real values may vary
slightly depending on the type of water in the pool.
8.4 I HELP menu
The appliance automatically reports any problems by way of information messages. To make these messages easier to
understand, the appliance has a troubleshooting menu which gives the meanings and the actions to be taken to resolve
the problem.
• Press
and
browse the menu using the
buttons. Press
to confirm.
• Select the error message using the
buttons. Press
to confirm.
•
The screen automatically scans a certain number of proposed solutions in order to provide explanations.
Once automatic scanning is complete, the appliance automatically returns to the troubleshooting menu.
• Press
to exit.