![background image](http://html1.mh-extra.com/html/zodiac/dual-link/dual-link_instructions-for-installation-and-use-manual_936316021.webp)
20
3.2.2 Preparing the pipe
•
Identify a suitable length (minimum 30 cm, without elbow) of straight pipe.
•
Dismantle the POD kit to retrieve the EU pipe adapter (DN50 mm) provided with 2 perforations,
see
figure .
•
For a DN50 mm pipe, use the EU DN50 mm pipe adapter (or use the DN63 mm bottom collar). Position it
on the pipe in a recommended position,
see “3.2.1 Recommended positioning”.
Use a centre-punch or
marker pen to mark the position of the holes to be made in the pipe,
see figure
.
•
Using the hole saw supplied, cut the 2 feed holes for the POD kit,
see figure
.
•
Ensure that the edges of the holes are smooth and deburred,
see figure
.
Bottom collar DN63 mm
Pipe adapter DN50 mm