Page 1 of 2
Digital Ultrasonic Thickness Testers
Time TT100
TT100 is a hand held microprocessor controlled thickness gauge
specifically designed for measuring the thickness of metallic and
non-metallic materials e.g. aluminium, titanium, plastics, ceramics,
glass and other good ultrasonic wave-conducting as long as the
material has parallel top and bottom surfaces.
With uses in many areas of industry TT100 can perform precise
measurements on various types of raw materials, components
parts, and assembled machinery. It can also be used to monitor
all types of pipes and pressure vessels for loss of thickness due
to corrosion.
TT100 is very easy to use, after a simple calibration to a known
thickness or sound velocity, the gauge will give fast and accurate
readings in millimetres. Sound velocities for 5 different materials
can be pre-set and 10 thickness readings can be stored in the
memory.
Specifications
Material :
Metallic & Non-Metallic
Measuring units :
mm
Range (probe dependant) :
1.0 to 225.0 mm
Frequency :
5 MHz
Accuracy :
+/-1% of Material Thi 0.1 mm
Display :
4 digit LCD
Resolution :
0.1 up to 99.9 mm
Memory :
10 readings
Sound velocity range :
1000 to 9999 m/sec
RS232 :
no
Probe Tip diameter :
12 mm
Sound Velocity :
5 Preset Sound Velocities
Pipe Diameter Limits :
20 mm x 3 mm
Auto power off :
yes
Working Temp. :
-5 to 40 deg C
Power Supply :
2 x 1.5 AA Alkaline
Relative Humidity :
< 90%
Alarm limit setting :
no
Surface Temperature :
< 60 deg C
Battery Life :
250 hours per battery set
Non-linear Automatic Compensation
Dimensions :
126 x 68 x 23 mm
Indication of Coupling Status and low Voltage
Weight :
170g
Optional probes
Type of Probe
Working
Measuring
Minimum
Characteristic
Frequency
Thickness Size
of
Range
Measuring Pipe
5PØ10
5MHz
1.2 - 225
Ø20 x 3
Straight Probe
5PØ10/90˚
5MHz
1.2 - 225
Ø20 x 3
Right Angle Probe
7PØ6
7MHz
0.75 - 60
Ø15 x 2
For testing thin materials
SZ2.5P
2.5MHz
3 - 300
For testing thick materials with Rough Surfaces
ZW5P
5MHz
4 - 80
High Temp up to 300 deg C
Standard Package
x
Plastic case – foam lined with Combination Lock
x
2 Probes – Straight & Right angle – both 5 MHz
x
Coupling Agent – (Vaseline or Grease Hand Cleaner will also give accurate readings)
x
Instruction Manual
http://www.instrumentsgroup.co.za
http://www.instrumentsgroup.co.za
http://www.instrumentsgroup.co.za
http://www.instrumentsgroup.co.za
http://www.instrumentsgroup.co.za
http://www.instrumentsgroup.co.za
http://www.instrumentsgroup.co.za
http://www.instrumentsgroup.co.za
http://www.instrumentsgroup.co.za
http://www.instrumentsgroup.co.za
http://www.instrumentsgroup.co.za
http://www.instrumentsgroup.co.za
http://www.instrumentsgroup.co.za
http://www.instrumentsgroup.co.za
http://www.instrumentsgroup.co.za
Supplied by
:
Test and Measurement Instruments C.C.
www.instrumentsgroup.co.za
Email:
Tel: 0027 (0)11 683 4365
