![background image](http://html.mh-extra.com/html/zodiac/alpha-iq/alpha-iq_installation-and-user-manual_4007648019.webp)
18
3.4 I Control using the app
Before controlling the cleaner with the app, you must:
•
Connect the control box to a power outlet,
•
Immerse the cleaner in the pool.
3.4.1 Programming and controlling cleaning cycles
From the application:
•
Start/stop cleaning;
•
View the current cycle's remaining cleaning time
(displayed in hours and minutes);
•
Increase/Reduce the cleaning time
by 15-minute sequences (depending on the model);
•
Choose the pre-saved cleaning modes
•
The new cleaning mode will take effect for the cleaning cycle in progress and all future cycles.
•
The cleaning cycle time may vary depending on the selected settings.
•
Schedule cleaning cycles (days and hours)
(depending on model); Cleaning cycles may be programmed to repeat,
only one program can be set per day;
•
Check the pool's temperature
during the cleaning cycle (depending on model);
The cleaner measures the water temperature while operating.
•
When the cleaner is at the bottom of the pool, it is normal for there to be a temperature difference
between that measured by the cleaner and that measured by a thermometer placed at the pool's surface
or measured by another appliance.
3.4.2 "Lift System" function for helping to remove the cleaner from the water
•
Only activate the Lift System function if the cleaner is in view.
•
From the app, press
to use the Lift System function (see
§ "2.6.1 "LIFT SYSTEM" automated function"
).
•
Press the arrows to rotate the cleaner left or right.
• When the cleaner is facing the right wall, press the
button to bring the cleaner to the wall.
3.4.3 Remote control (according to model)
The cleaner can be controlled using your smartphone or tablet
as a remote control.
•
Use the remote control mode only if you have the cleaner within view.
•
2 modes are available
for piloting the cleaner (depending on the equipment):
"Joystick mode":
Press the icons to move the cleaner
forwards and backwards
and to turn
left or right.
"Kinetic mode":
Control the cleaner by tilting the mobile device
upwards
(backwards movement),
downwards
(forward movement),
to the left
(turn left),
to the right
(turn right)
.
•
For cleaning a specific area,
use the
"Spot Cleaning"
function (depending on the model)
:
after this function is
activated, the cleaner cleans a 1m² area directly in front of it.
•
If the cleaner is relatively slow to respond to an action requested in the app, check the Wi-Fi network
signal,
see§ "3.2 I First-time cleaner configuration".
EN