![background image](http://html.mh-extra.com/html/zodiac/alpha-iq/alpha-iq_installation-and-user-manual_4007648030.webp)
29
5.4 I Updating connected cleaners
Connected cleaners can be updated with new developed functions or product improvements. Users cannot always see
these improvements.
The cleaner cannot be controlled by the app until the update has been installed.
When an update is available (visible in the iAquaLink™ app,
see image
) here are some recommendations before
you press the start installation button:
•
Place the cleaner and the control box as close as possible to the home Wi-Fi router;
•
Check the strength of the home WiFi signal.
•
Leave the control box connected to the mains and the cleaner connected to the control box until the installation has
finished;
•
The control box must be connected to the home Wi-Fi network and the iAquaLink™ app must be open.
Start the update:
•
Press the button (
see image
) to start the installation using the iAquaLink™ app;
•
A message is displayed during the update (
see picture
); a cleaning cycle cannot be started until the update is
finished. The update time is usually 10 to 20 minutes;
•
A message is displayed when the update is finished (
see image
).
•
If there is a problem with the installation an error message is displayed after 60 minutes (
see image
), see § "5.2 I
User alerts").
PrOG
Message
Flashing LED
Very fast
or
( )
Er 12
Code
Flashing LED
x5
or
* iAquaLink™ app messages may be subject to change.
Recycling
This symbol is required by the European directive DEEE 2012/19/EU (directive on waste electrical and electronic
equipment) and means that your appliance must not be thrown into a normal bin. It will be selectively collected
for the purpose of reuse, recycling or creating value. If it contains any substances that may be harmful to the
environment, these will be eliminated or neutralised. Contact your retailer for recycling information.