6
Figure 26. Remove Filter Canister
9.
Empty all debris from the filter canister, then
rinse the canister, the filter support, and the
cleaner under water or using a hose.
Refer to Figure 27.
Figure 27. Wash Filter Canister
7
6.2. Cord Tangling
IMPORTANT
Cleaner power cable may become tangled if correct
procedure is not followed after each cleaning cycle.
Tangling of the power cable can occur more frequently
when operating the cleaner on the automatic timer
7-Day Programmed Cycle (3010 WD and 3510 WD).
Do not leave the cleaner unattended for prolonged
periods and follow the procedure below to avoid
excessive tangling.
After every cleaning cycle:
1.
Unplug power to the cleaner at the control unit.
2.
Remove the cleaner from the pool and untangle
all kinks and coils in the power cable starting at
the cleaner head.
3.
Remove filter canister and rinse with clean
water. Plug power cord back into control unit
and store cleaner for next use.
Page
18
ENGLISH
Zodiac
®
3000 WD, 3010 WD, & 3510 WD Robotic Pool Cleaner
|
Owner's Manual
