2.
Remove the old tire as shown in Figure 36.
2
Figure 36. Remove the Old Tire
3.
To replace the tire, position the tire on the wheel
making sure to orient the tire so that the word
INSIDE is toward the body of the cleaner. See
Figure 37.
Figure 37. Tire Replacement Orientation
1
I N S I D E
Towards
Body
IN
SI
DE
INS
IDE
4.
Push one side of the tire on to the wheel and fit
the rib of the tire in the groove of the wheel as
shown in Figure 38.
2
Figure 38. Start on One Side of the Tire
5.
Work the tire onto the wheel and verify the
rib of the tire is positioned properly within the
groove of the wheel. Refer to Figure 39
3
Figure 39. Work the Tire On Around the Wheel
6.
Push and position the rib of the inner side of the
tire in the groove of the wheel. Refer to Figure
40. If needed, turn the wheel gently to help
with installation.
4
Figure 40. Push the Tire into Place on the Wheel
Section 7. Replacement Parts
The complete replacement parts list and exploded
view is available on the Zodiac website at
www.ZodiacPoolSystems.ca
Page
20
ENGLISH
Zodiac
®
3000 WD, 3010 WD, & 3510 WD Robotic Pool Cleaner
|
Owner's Manual
