5.2 Changing the Clock Day and Time
1.
Press and hold
for three (3) seconds.
All days of the week flash twice.
2. Press
or
buttons to cycle
through seven (7) days and display desired day.
3.
Press
to select.
Current hour setting flashes.
4.
Press
or
buttons to cycle
through 24 hours and display desired hour
setting.
NOTE:
Control unit is set to display time in 24-hour
clock format. Time setting will cycle through 1-24.
5.
Press
to select.
Current minutes setting flashes.
6.
Press
or
buttons to cycle
through 1-59 minutes and display desired
minutes setting.
7.
Press
to select.
8.
Press
to set time and exit the menu.
9. Press
to display current day and time
setting and verify the time you set is correct.
5.3 Changing Default Cleaning Times
Use
to change cleaning surface setting.
Default cleaning times are:
Bottom Only:
1 hour 30 minutes
Bottom and Sides:
2 hours 30 minutes
Waterline: (3510 WD)
Variable cleaning time depending on settings
1.
Press
or
buttons to increase or
decrease cleaning time in 30-minute increments.
2. Press
to select.
5.4 Programming Cleaning Cycles
You can program up to seven cleaning cycles.
Program cleaning for either seven consecutive cycles or
the same cycle repeated over several weeks
(e.g., every Wednesday and Saturday for three weeks).
1.
Choose pool cleaning settings to program.
All models:
•
Choose
to select either bottom of
pool or bottom plus sides of pool.
3510 WD:
• Choose
to select waterline only in
addition to bottom or bottom plus sides options.
• Choose
to select intensive or
high intensity level cleaning.
• Choose
to select pool shape.
Page
15
ENGLISH
Zodiac
®
3000 WD, 3010 WD, & 3510 WD Robotic Pool Cleaner
|
Owner's Manual
