To Cancel All Programs:
1.
Press
to make sure you have exited the
Programming Menu.
2.
Press and hold
to delete all
programming in the control unit.
The display will turn off for one (1) second.
When all programs are cancelled, the current
day and time is displayed on the screen with no
days of the week lit.
Section 6. Cleaning and
Maintenance
WARNING
To avoid electric shock and other hazards which
could result in permanent injury or death, disconnect
(unplug) the cleaner from the power source before
performing any cleaning and maintenance.
6.1 Cleaning the Filter Canister
The filter canister should be cleaned at the end of each
cycle.
1.
Ensure that the control unit cable has been
disconnected from the electrical outlet or that
the floating cable has been disconnected from
the control unit.
2.
Remove the cleaner from the water and let
the remaining water drain by maintaining the
cleaner in the vertical position.
3.
Set the unit on its wheels.
4.
To remove the filter from the cleaner, follow the
steps 5 through 8 (Figures 23 through 26).
5.
Push the cover lock (1) and lift the cover (2)
until it is secured in the vertical position. Refer
to Figure 23.
2
1
Figure 23. Lift Cleaner Cover
6.
Remove the filter assembly from the body (3),
as shown in Figure 24.
3
Figure 24. Remove Filter Assembly
7.
Push the quick release button on the canister
assembly (4) and pull open the filter assembly
(5). Refer to Figure 25.
4
5
Figure 25. Open Filter Assembly
8.
Separate the filter canister from the filter
support (6), as shown in Figure 26.
Page
17
ENGLISH
Zodiac
®
3000 WD, 3010 WD, & 3510 WD Robotic Pool Cleaner
|
Owner's Manual
