Product Manual - ZMORPH i500
11
3. Manufacturer’s warranty
and liability
Warranty and liability
3.1 Scope of the warranty
Zmorph i500 3D Printer is designed to be reliable. In case of technical difficulty with any parts, it can be easily
removed and replaced.
3.1.1
Zmorph S.A. with its registered office in Wrocław, 53-238 Wrocław, ul. Aleksandra Ostrowskiego 9,
Poland (“Zmorph”) provides a one-year warranty for its 3D printers.
3.1.2
Guarantor is only liable for the physical defects resulting from the inherent causes in the sold product.
3.1.3
Duration of the warranty starts at the date of purchase of the product by the initial Buyer. The Date of
Purchase is the date specified in the sales invoice. The warranty period of the repaired product is extended by
the time which was required to repair the product (which includes the time from the delivery of the defective
product with the complete warranty claim until the date of returning the repaired product to the Costumer).
3.1.4
Warranty does not cover defects resulting from other causes than indicated in clause 3.1.2, especially
any defects resulting from:
a) improper use or application of the product;
b) improper product selection for the existing installation site conditions;
c) improper or inconsistent with User Guide installation (including improper connection to the main pow-
er supply), maintenance, storage or transport;
d) mechanical, chemical or thermal damages;
e) deliberate product damages;
f) damages ensuing as a result of non-original or inconsistent with Zmorph’s recommendations or with
the User Guide product use;
g) random events;
h) factors being result of major force, random events or any other external factors;
i) use of non-original parts or consumables;
j) modifications, repair attempts, interference in the product carried out by any other person than Zmorph
representative or other representative authorized by Zmorph to carry out any of the above mentioned
actions;
k) continued usage of the product despite occurrences indicating an obvious defect;
l) improper transport methods provided by the Costumer;
m) use of filaments other than recommended by Zmorph, list of which is available at zmorph3d.com