Product Manual - ZMORPH i500
30
Setting up Zmorph i500
9.5 Assembling air filtration system
Take the Air filtration holders
and the Filter inserts out
from the accessories box.
Put the filter holders in appropriate sockets on the machine.
HEPA/carbon
filter
Dust filter (G4)
For more informations check the signs
in the filter sockets.
For more informations check the signs
on the holders and the inserts wrapping.
NOTE
NOTE
Install the filters in the
appropriate holders.
For the HEPA/Carbon
filter make sure that
the Carbon filter is on
the outside.
FILTRATION - INPUT
[DUST FILTER]
FILTRATION - INPUT
[DUST FILTER]
Press the “Release accessories”
button, the machine will release
the accessories located inside of
the machine. Open the front door
and gently remove the protective
foam from the heated bed. After
that you can easily remove all
accessories from under the bed.
Clean out the surface of the
heated bed. The protective foam
might leave some dust on the
glass surface.
