Product Manual - ZMORPH i500
50
11. Service instructions
Service instructions
11.1 Basic maintenance
11.2 General procedures
Maintenance work should be carried out regularly to keep the machine in good condition and to achieve
a high-quality printed object every time. Some parts of the machine require maintenance before each job
and some only periodically. Maintenance is not complicated or time-consuming. During the maintenance
process, the machine should be cooled down (preheat only if necessary) and disconnected from the
power source (turn on only if necessary).
It is recommended to equip yourself with additional protective equipment such as thermal insulation
gloves and safety goggles. The machine is supplied with a basic set of tools for maintenance and service.
The following tables summarize the maintenance and repair guidelines for the main components of the
machine, the tables are divided by place of inspection, necessary tools, and their frequency.
To Do
Tools
Frequency
Solution
Cleaning the work area
from model residues
and adhesive.
▪ vacuum cleaner,
▪ paper towel,
▪ cleaners
(containing alcohol),
▪ spatula,
Before each job
Cleaning the interior of
the machine and the
power supply from dust
▪ compressed air
▪ vacuum cleaner
Every 10,000 working hours
Changing the filter
cartridge
Every 1000 working hours
or each 6 months
Checking the surface of
the glass worktable
for any damage
Before each job
Changing the Waste
Remover Tip
▪ 2.5mm Allen Key
when noticeable wear
Cleaning garbage collector
