Zmorph 2.0 S, User Manual

Page: 13 / 83

GET STARTED / PRINTER CONNECTION
13
If your network doesn’t use DHCP
(unlikely), or you want it to have static IP
address,
edit config file on SD card, and
change network settings (at the end).
3
You can also connect to the machine using Telnet protocol or HTTP.
To use it, follow these steps:
Connect the machine
to a router in your network using
the cable provided. If your network
has DHCP active (most networks do),
ZMorph will get it’s IP address
and display it on front panel.
1
Type this address to
Voxelizer. Click ‘Connect’.
Voila!
2
LAN CONNECTIVITY