TS200 Series Tripod Turnstile
User Manual
P a g e
|
13
This equipment is designed to drop the arms automatically if there is power failure thus people can
pass freely. Also, there is an interface on the turnstile control board connecting with an emergency
switch (J6 Drop Arm) which keeps the tripod turnstile open in case of emergencies. Please lift the
arms manually after at least 6 seconds after power restoration.
Maintenance
Forming maintenance consciousness
The tripod turnstile needs to be maintained regularly and repaired once it is damaged. It is
recommended placing warning signs at conspicuous positions for alerting every passersby to pass
carefully and in good order. Reasonable maintenance consciousness helps to guarantee long-term
usage of the tripod turnstile.
Regular maintenance
Cleaning and protection liquid dedicated for stainless steel are recommended to wipe the outer
shell of the equipment regularly. The tripod turnstile used outdoors or in an environment with lots
of dust must be maintained at least once a year, for example, clean up the dust and add appropriate
lubricating oil to the disk wheel. Please note that regular maintenance should only be performed
after power-off, as shown in Figure 5-2.
Turnstile-opening Solenoid
Lock Rod
Drop-arm
Solenoid
Position Sensor
Disk Wheel
Figure 5-2