TS200 Series Tripod Turnstile
User Manual
P a g e
|
11
Bit Setting Duration Bit Setting Duration
111
5s
011
30s
110
10s
010
40s
101
15s
001
50s
100
20s
000
60s
Note:
The turnstile’s opening duration is set to 5s by default.
4.3.2
Direction Indicator
It is to indicate whether people can pass through the gate. The green arrow means passing is
allowed while the red cross "
X
" means that passing is prohibited. The indicator status can be set with
number 4 and 5 in the DIP switch. The descriptions of the bit settings are as follows:
11
= Passing is allowed in both directions.
10
= One-way forbidden; right passing is allowed.
01
= One-way forbidden; left passing is allowed.
00
= Both ways forbidden.
4.3.3
Continue Passing Function
With the “Continue Passing” function, the turnstile could remember at most 20 swipes of one card at
one time and allows up to 20 people to pass so they don’t have to swipe card each time. This
function can be enabled or disabled with number 6 in the DIP switch. The descriptions of the bit
settings are as follows:
In the DIP switch, number 6 is used to enabled or disabled the
Continue Passing Function
; number
7 is used to set the initial value of
Continue Passing Function
.
Number
6
Number
7
Function
Opening Duration
0
Disabled Disabled
Continue Passing
Function
Please refer to section
4.3.1 Setting the
Turnstile Opening Duration.
1
1
Enabled
Continue Passing
Function
The initial value is 16s, and the
Opening
Duration
= 16 + (N -1) * 6.
0
The initial value is 8s, and the
Opening
Duration
= 8+ (N -1) * 6.
4.3.4
Alarm Function (Optional)
In the DIP K1 switch, number 8 is used to enabled or disabled the
Alarm Function
.
1
= enabled