Chapter 1: Installation overview
26
ZP3 Fire Control Panel Installation, Commissioning, and Maintenance Manual
5
>
!
3
-
1
2
3
4
1. Chassis located under clips
2. Connect ribbon cable to SSB2
3. Accessory plate
4. Thumb screw
A ribbon cable is fitted to the accessory plate. Connecting the ribbon cable to the
socket as shown in Figure 18 automatically connects all auxiliary boards to the
ZP3 main board. The accessory plate enables easy access to the main board
after installation.
The basic panel incorporates a standard range of inputs and outputs. If additional
inputs or outputs are required, a range of optional modules is available that fit
into the panel. The auxiliary I/O boards mount onto the auxiliary chassis as
shown in Figure 19.
Summary of Contents for ZP3
Page 163: ......
