Chapter 1: Installation overview
ZP3 Fire Control Panel Installation, Commissioning, and Maintenance Manual
3
Refer to Table 4 below for detailed specifications for the ZP3 Fire Control Panel.
&
-
/
!
6
+
4
5
-
-
-
Fire alarm panel
Complies with European Standard EN 54-2
Power supply
Complies with European Standard EN 54-4
Electromagnetic
CE Marked. Complies with European Directive 89/336/EEC.
Complies with standards BS EN 50081, BS EN 50082, and IEC
950
IP rating
IP30: For indoor use only
7
Loop protocol
ZP addressable loop protocol
Isolators
Up to 16 per loop (advisable to use 11)
ZP3 four-loop panel
Devices-508
Loop devices, such as sensors,
sounders, interfaces
Zones-128
128 digital display, 50 built-in
zone LEDs
Outputs-768
Located on the I/O Bus (local
and/or remote)
ZP3 two-loop panel
Devices-254
Loop devices, such as sensors,
sounders, interfaces
Zones-128
128 digital display, 50 built-in
zone LEDs
Outputs-768
Located on the I/O Bus (local
and/or remote)
ZP3 one-loop panel
Devices-127
Loop devices, such as sensors,
sounders, interfaces
Zones-128
128 digital display, 50 built-in
zone LEDs
Outputs-768
Located on the I/O Bus (local
and/or remote)
+
8
-
Mains voltage
230 VAC +10%,
í
15%
Mains frequency
50 Hz (
r
15%)
Mains current (maximum)
1 A
Power
130 W
CIE input voltage
21.0 to 27.6 VDC
Summary of Contents for ZP3
Page 163: ......
