Chapter 2: Installing the ZP3 fire control panel
46
ZP3 Fire Control Panel Installation, Commissioning, and Maintenance Manual
1. Make sure the backup batteries are correct as specified under “Batteries” in
Table 4 on page 3.
2. Position a backup battery in the left mounting position in the chassis as
shown in Figure 35 below.
3. Locate the battery mounting bracket (packed separately in bubble wrap in the
main shipping carton).
4. Hook the curved end of the securing hook on the battery mounting bracket
into the hook locator on the hook mounting plate located on the chassis (see
Figure 35 below).
5. Taking care that the securing hook is in position, install the second backup
battery in the right mounting position in the chassis.
6. Secure the batteries to the chassis with the mounting bracket using the wing
nut supplied (see Figure 36 on page 47).
7. Connect the backup batteries as described under “Battery connection” on
page 54.
n
o
p
q
r
s
t
v
z
{
q
y
z
|
|
s
r
q
x
|
o
x
p
y
}
o
|
o
x
Hook locator
Battery
mounting
position (right)
Battery
mounting
position (left)
Hook
mounting
plate
Securing
hook
Summary of Contents for ZP3
Page 163: ......
