ZIROX XS22, Manual

Page: 14 / 27

Measuring system XS22-E2010 6 Parametrization
14
XS22_E2010
6 Parametrization
6.1 Menu operation – an example
After switch-on, the warm-up starts. From 400 °C on, the current
temperature is displayed in the second line. After reaching the
working temperature, the oxygen concentration is displayed in
the first line.
By pressing
several values can be displayed in the second
line (see chapter 4.1).
With help of both keys, an offset-calibration („zero point
calibration“)
in clean air and a span gas calibration is possible.
The complete menu is shown schematically in figure 4, p. 18.
The sensor can stay very hot for a while after switch-off and
during operation.
CAUTION – VERY HOT – DO NOT TOUCH!
6.2 Display
E2010
Start display, approx.3sec
Version 2.4.6 Software version
E2010
Start display, approx.3sec
THERMOCO. TYP B Thermocouple type
WARM-UP Warm-up of the ZIROX-sensor
Temp: 450 °C
O2: 20.64 Vol%
Temp: 700 °C
O2: 20.64 Vol%
Vz: -2 mV
Temp: 555 °C
***WARM UP***
Uz: xx.x mV
O2: 20.6 Vol.-%
Calibration