OPERATION
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
50
ZI-BAS205 / ZI-BAS250
50
17.3.5
Cutting Curves
When cutting curves, pay particular attention to the width of the saw blade. Choose a narrow band
saw blade with which you can cut even the smallest radii in your workpiece. Work at a low feed rate
so that you do not push the workpiece sideways out of the cutting line.
17.3.6
Cutting with a template, handling shaped work
Working with a template
Correct handling of moulded parts
17.3.7
Cutting circular work
To cut round slices, use a circular cutting
device as shown in the illustrations on the left
and below!
17.3.8
Fixtures
Fixture without workpiece
Operator placing workpiece fixture
