28
Look, a right
and
a left!
Sharp inside corner.
While the right sponson is curing, you
can glue the left sponson. Everything is
the same, except the left sponson has
only the two tubes.
*Make sure that the left sponson is a
mirror image of the right*
With the right sponson on it’s right
(outside) side, and the left sponson on
it’s left (outside) side,
both sets of
brass sleeves should be sticking out.
Glue the tubes and plates as before, and
weight or clamp until cured.
Be sure of this, as this is one of those
critical points.
When the sponson sides are cured, let’s
do the sheeting. This is where the
strange order comes in. The sheeting is
done in this order because it has to
overlap in a specific way.
Follow along and you won’t have any
trouble. If something doesn’t seem to fit,
stop and find out why. Epoxy is
impossible to remove from foam…
Grab all the sheeting pieces, including
the ones you marked earlier.
Use a file to sharpen the inside corner of
the sponson step as shown.
