10
Using the square provided in the kit.
Tub sides glued to bulkheads.
Tub jig.
Assemble the tub sides on a flat surface
Check the fit of the bulkheads in the left
tub side. If all is well, glue the bulkheads
in place one at a time, using the square
from the kit.
Flip the tub over and lightly sand the
bottom.
Now is the time to use your tub jig. If you
don’t have the ability to make an
aluminum jig, see below.
Use a pair of thick wooden sticks. Leave
these clamped to the sides while gluing
the aft bottom in place.