20
Note long bevel sanded in front of ski.
Just like the tub bottom.
Drill in the center of this hole.
Glue the forward ski bottom in place,
and let the front overhang. This is done
exactly like the tub bottom sheeting.
Sand a sharp bevel on the front of the
ski bottom sheet, so that it blends into
the tub bottom. Do not glue the ski to the
tub yet.
Servos
Bolt the rudder in place. This should be
as far to the right as possible.
Make a mark on the transom where the
rudder pushrod will exit.
Sight this from behind the boat.
(see drawing).
