33
Turn fin mounting.
Note bottom sheet overhang sanded off under turn fin.
Turn Fin
Sharpen the outside of the turn fin.
Mark the center of the turn fin dowels.
Drill 3/32 pilot holes on your marks.
Attach the turn fin with the supplied
sheet metal screws and washers.
If you have a bottom overhang on the
sponson, sand it flush where the fin
contacts it.
Note that you can later fine tune the fin
with the oversized, slotted holes.
Remove the turn fin in preparation for
finishing.
Finishing
Sand the tub and sponsons, but be sure
to leave the overhangs.
Fill any holes or imperfections with wood
filler.
Sand everything with 150.
