806834 v1.02 07.21 G5 Online install instructions and user guide
95
USER GUIDE
3.7.7 Advanced settings
continued
Advanced settings 2 (Wave Tap only)
[ ]
[ ]
Section 3 Command Centre Screen
12:12 PM
ADVANCED SETTINGS 2
Wave Tap Sensor Demister Mode
Allows Control of Heating of Wave Tap
Wave Tap Lock Mode
Dual Sensors Required for Chilled/Sparkling
Lorem ipsum
Advanced settings 2
(Wave Tap only)
Wave Tap Sensor Demister Mode
• Enabled (default): activates the Wave Tap
internal heater to prevent its sensors from
being affected by condensation from steam.
• Disabled: choose this option to conserve a
small amount of power.
Wave Tap Lock Mode
• Disabled (default): Chilled or sparkling
water can be dispensed by activating the
corresponding sensor.
• Enabled: in addition to the chilled or sparkling
sensor, the rear sensor must also be activated
in order to dispense chilled or sparkling water.
This is useful to prevent false activation if a
highly reflective surface is present (such as
high-visibility reflective tape).
• Note
Bottle fill is disabled.
