background image

806834 v1.02 07.21 G5 Online install instructions and user guide

79

USER GUIDE  

SAFETY

INSTALLATION

TROUBLE

SHOOTING

COMMISSION

USER GUIDE

 

TAP

SAFETY

LCD SCREEN

CONTACT

INS

TALL

A

TION

 GUIDE

Section 3 Command Centre Screen

3.1 How to use the Command Centre screen

•  The Command Centre has a colour touch screen 

liquid crystal display.

•  The display consists of icons, buttons and fields 

which can be changed by simply touching the 
buttons and icons. 

•  Navigate to the required screen. Here's an 

example :

•  The display consists of over 150 individual menus 

and screens.

•  Navigate to the required screen on this side of 

the page, here's an example :

Set the language

•  Touch the 'top left' icon to navigate to the main 

menu. 

3.2 Screen guide

•  Then touch the general settings icon to navigate 

to the general settings menu. 

•  Touch the language icon to navigate to the 

language screen.

Language  

Set the language

•  Touch the relevant button to choose 

the language.

•  Tips and guidance are written  on both 

sides of the page to help you navigate 
and understand the options.

•  The settings are made on this side of 

the page.

•  To go back.

•  To go to the home screen.

[   ]

[   ]

[   ]

[   ]

[   ]

[   ]

Summary of Contents for HydroTap G5 BCS















































































































Reviews: