Operation instructions
Monitoring rules
6
Page 18
6.4
Monitoring rules
The recorder is programmed by the Diagnostik
Suite
installed on the PC. After
the pre-programmed start time has been reached, the recorder will
automatically begin the measurement program and perform the blood pressure
measurements based on the measurement plan. To obtain reliable blood
pressure values, certain rules must be observed.
Guidelines
Inform your patient of the objective and expected results of the monitoring.
Provide him/her with an event block and the rules to be observed.
It is recommended to wear a thin shirt or blouse under the cuff. This does
not affect the accuracy of the blood pressure measurement but prevents
problems as a result if the cuff is worn for a long period of time (sweat,
itching, pain, etc.).
The cuff must be correctly placed and connected.
Patients should avoid excessive movements during the blood pressure
measurement. Opening and closing the hand should be avoided during the
measurement, as should moving the fingers.
Patients should keep their arm loose and somewhat away from their upper
body:
When standing
Allow arm to hang loosely, place hand in pants pocket or
hang fingers from waistband of pants.
When sitting
Place lower arm loosely on a table or support surface.
If the blood pressure measurements cause bruises, numbness or pain in
the hand, the cuff should be immediately removed from the arm and
disconnected from the recorder. Events of this type should be discussed
with the physician no later than after the monitoring.
Patients should also not remove the recorder during the night. By loosening
the straps, problems due to movements during sleep can be avoided.