Operation instructions
Displays
6
Page 13
6.
Operation instructions
6.1
Displays
LCD display
The device has an integrated LCD display (1) on which the measurement
results and various information is displayed. The most important information is
listed below.
Two lines indicate that
the recorder is
switched off
LCD test: All seg
-
ments are shown
In normal status, the
time is shown
During night-time
operation, the time is
shown together with
the moon
Communication with
the computer
Release of pressure
during measurement;
current pressure is
displayed [mmHg]
Starting cuff pressure
during blood pressure
measurements
Inflation during current
blood pressure
measurement
Heart symbol blinking
at heart rate: Active
measurement
Systolic value of the
measurement which
has just ended
[mmHg]
Diastolic value of the
measurement which
has just ended
[mmHg]
Pulse rate of the
measurement which
has just ended [beats
per minute]
Blood pressure
measurement
discontinued by
pressing a button
Battery voltage display
(2.37 V)
Error display
Event marking with
button
The struck-through
battery symbol warns
against a weak battery
In addition to the most important messages, there are situations, malfunctions or
errors which are displayed with a certain code. These error codes are saved,
transmitted with the measurement results to the computer and displayed in the
Diagnostik
Suite
software. This helps service staff to better identify and correct
the causes of errors or incorrect measurement results.