22
11.4.3 WorkpieceNo
The workpiece number is used for selecting the previously stored workpiece data, as well as for selecting the
"WorkpieceNo" data record in which the current process data is stored.
The "WorkpieceNo" data set enables individual workpieces to be taught in to the product very quickly.
With a value > 0 and data acquisition via a handshake, the corresponding workpiece recipe is loaded in the product.
INFORMATION
For example codes, refer to the "Quickstart Basic Parameters" and "Recipe Examples" sections.
Name
WorkpieceNo
Data format
UINT8
Permission
Write
Transfer
Cyclical
Value range
0 ... 32
11.4.4 PositionTolerance
Used to configure the position tolerance with a resolution of 0.01 mm.
Thus, the value range of 0 to 255 can be used to set a maximum tolerance of 2.55 mm in both directions.
INFORMATION
Example:
For TeachPosition 1500 (15.00 mm), PositionTolerance 150 lets you configure a tolerance of 1.50 mm in both
directions.
This means that the TeachPosition range starts at 13.50 mm and goes all the way up to 16.50 mm.
TeachPosition
PositionTolerance
Name
PositionTolerance
Data format
UINT8
Permission
Write
Transfer
Cyclical
Value range
0 ... 255
INSTALLATION AND OPERATING INSTRUCTIONS:
GEH6000IL/GED6000IL
DDOC00212 / p
EN / 2022-05-01
Zimmer GmbH • Im Salmenkopf 5 •
77866 Rheinau, Germany •
+49 7844 9138 0 • www.zimmer-group.com
