(Date / Name): 16.04.2009 Sc
Drawing no.: 12280-0701-00
Page 19 of 24
Name: TR 800 WEB
ZIEHL industrie-elektronik GmbH + Co KG, Daimlerstr.13, D-74523 Schwäbisch Hall, Tel.: +49 791 504-0, Fax: -56, email: [email protected]
The progression of the measurements is displayed in a chart. Sensors can be flexibly displayed
or hidden.
Checkbox details:
100 logged points (see Point 8.16) are displayed in the chart.
Using the [<older] / [>more recent] buttons, one can navigate
chronologically in both directions.
Complete checkbox: The entire logged area is shown in the chart
(reduced to 100 points)
Absolute checkbox: Unit of the y-axis corresponds to the sensor metrics
Relative checkbox: Unit of y-axis: 0-100%
8.18 Time-dependent control / Scheduler
!
To assume the settings unchanged, press the "Save" button.
The button becomes active after exiting an unchanged input box.
The time control specifies which alarm values (Day or night) are active at which time.
The following settings are available:
o
Day value active (no time control; alarm day-values always apply)
o
Night value active (no time control; alarm night-values always apply)
o
Time controlled (the specified switchover times apply)
The times for the night values are entered into the table.
Up to four switch times can be set for each day of the week. To activate these times, the
"active" check box for the corresponding day needs to be set.
Example for switchover times:
Specification in the webbrowser
Night values are active
Su 00:00 Uhr
-
Su. 06:00 Uhr
Su 22:00 Uhr
-
Mo. 07:30 Uhr
Mo 21:30 Uhr
-
Tu. 00:00 Uhr