(Date / Name): 16.04.2009 Sc
Drawing no.: 12280-0701-00
Page 10 of 24
Name: TR 800 WEB
ZIEHL industrie-elektronik GmbH + Co KG, Daimlerstr.13, D-74523 Schwäbisch Hall, Tel.: +49 791 504-0, Fax: -56, email: [email protected]
8.9 Find the unit in the network
Prerequisite: Webbrowser Internet Explorer 7 or Firefox 3 (tested).
The TR 800 Web provides four facilities to find itself in the network:
8.9.1
DHCP server
In the network, there is a DHCP server; newly added units automatically are assigned an
IP address
Query of the IP address in the unit
⇒
Press the DOWN button 2x, then the SET button
⇒
IP address appears in the digital display
⇒
Status of DHCP query is displayed (
8
8
8
8
off
off
off
off
8
8
8
8
/
8
8
8
8
on
on
on
on
8
8
8
8
/
8
8
8
8
FAIL
FAIL
FAIL
FAIL
8
8
8
8
)
Start webrowser and enter the IP address in the address line [Return]
⇒
The TR 800 Web homepage opens in the webbrowser
⇒
Close the login window with the OK button (without user name and without password)
If the network logon fails via DHCP, a network configuration will be performed based on
zeroconf (IP = 169.254.x.x).
8.9.2
Default IP- Adress 10.10.10.10
! Use this setting for configuration only.
Push slide switch to IP 10.10.10.10 (sketch Point 8.8)
⇒
Requires a reboot of webserver (press RESET button), in the digital display
8
8
8
8
boot
boot
boot
boot
8
8
8
8
flashes (start duration ca. 1 min)
User management is deactivated, http-Port = 80 und https-Port = 443
Note: The following actions can only be performed with administrator rights.
Enter this command into your PC in the input prompt (command line):
route add 10.10.10.10 xxx.xxx.xxx.xxx
(xxx.xxx.xxx.xxx= IP address of PC)
⇒
Route for the TR 800 Web
ping 10.10.10.10
⇒
Connection test
⇒
TR 800 Web replies
Reply from 10.10.10.10: Bytes=32 Time=3ms TTL=32
Reply from 10.10.10.10: Bytes=32 Time=1ms TTL=32
Ping statistic for 10.10.10.10:
Package: Sent = 4, Received = 4, Lost = 0 (0% loss),
⇒
Connection okay
Start webrowser and enter the IP address (10.10.10.10) in the address line [Return]
⇒
The TR 800 Web homepage opens in the webbrowser
⇒
Close the login window with the OK button (without user name and without password)
⇒
Make the basic network settings
⇒
Push the slide switch to IP USER (sketch Point 8.8)
⇒
Requires a reboot of webserver (press RESET button), in the digital display
8
8
8
8
boot
boot
boot
boot
8
8
8
8
flashes (start duration ca. 1-2 minutes
Note: The settings made in the webbrowser under "Network" are only effective after the
slide switch is switched to IP User and the unit has been rebooted (press RESET button).
