ZIEHL TR 800 Web, Operating Instructions Manual

Page: 4 / 28

(Date / Name): 20.04.2011 Fu/Su Drawing no.: 12280-0701-05
Page 4 of 28 Name: TR 800 WEB
ZIEHL industrie-elektronik GmbH + Co KG, Daimlerstr.13, D-74523 Schwäbisch Hall, Tel.: +49 791 504-0, Fax: -56, email: info@ziehl.de
4. Display and controls
1, 2 LEDs (yellow) RS485 interface

Rx flashes briefly: Unit is receiving data via the RS485 interface

Tx flashes briefly: Unit is transmitting data via the RS485 interface

Rx and Tx flash/illuminate during firmware update
3 LED (red) Sensor error

Illuminated: Fault in a sensor circuit
4 LEDs (red) alarm

Illuminated: Alarm (1-4) has occurred

Flashes briefly (1:4): Response delay is running

Flashes long (4:1): Backshift delay is running

Flashes uniformly (1:1): Ready for reset, reset with key
Press "SET/RESET" ≥ 2s or ext. Reset Y1/Y2
5 LED (yellow) Night

Illuminated: Limits for "Night" (can be set via browser) are active
6 LEDs (yellow) sensors

Illuminated: Displays the sensor value belonging to the LED in the
digital display

Flashes: Sensor error in the corresponding sensor circuit
7 LEDs (yellow) relay state

Illuminated: The relay belonging to the LED is picked up

Off: The relay belonging to the LED is released
8 Digital display (4 digits)

Display of sensor value

Display of error codes

Display of menu and configuration mode
9,10 Up button / Down button

Change into the menu mode (see Operating instructions Point 8.3)
11 Set/Reset button

Press briefly: Displays the next sensor (sensor LED illuminates)

Press for 10 s: Displays the software version (e.g. 0-00)
12 LED (yellow) Displays Ethernet transmission speed

Off: 10 Mbps On: 100 Mbps
13 LED (green) Displays Ethernet data traffic

Flashes during active data transmission
14 IP address slide switch

Towards Ethernet jack: IP address 10.10.10.10

Towards reset button: IP address User (set via web browser)
15 Webserver reset button

Internal webserver restarts when pressed (duration ca. 1 minute)