Encoder ET 3R-1024
The ZIEHL-ABEGG encoder ET 3R-1024 is designed with a quill shaft for direct mounting on the
controlled motor . The second motor shaft is still available.
The encoder features contactless operation free of wear.
The encoder connected to the controller ZETADYN 1DV produces two rectangular signals with 1024
pulses per revolution each at 24 Vss (centre zero). They are in phase quadrature.
The encoder part produces a rectangular signal with 64 pulses per revolution electrically separated at 12
Vss. The signal is provided for monitoring devices (for example GU1).
Description see data sheet ET 3R-1024, Connection see figure A8.
Encoder ET2R-1024
Hollow shaft encoder like the ET3R-1024, however with a closed case.
An additional signal track for monitoring functions is not available.
All encoders will be delivered with a 10m connecting cable.
Encoder 58H-1024
We offer a retrofitting kit where an external encoder is driven by a V-belt (see 1.3 Requirements).
Encoder G71-xx30
This encoder is of the same construction as an analog tacho with Euro-flange (see 1.3 Requirements).
