ZIEHL-ABEGG UNIcon CTG-150AVC, Operating Instructions Manual, Page: 12 / 36

•
For automatic addressing with hand held terminal type A-G-247 max. 63 members.
On the
fi
rst user that is connected directly to a terminal, MODBUS Master or PC,
“
GND
”
and “ ID1 ” or “ ID2 ” must be bridged. This is recognised as a result and occupied by
address 1 .
For the following users the connection “ ID1 ” or “ ID2 ” of a user respectively is connected
with connection “ ID1 ” or “ ID2 ” of the next user.
The automatic addressing of other users is initiated by the previous user via this
connection.
6 Multipurpose LC display and keyboard
17.6
°
C
Actual value
Line 1: 16 fi gures for actual and desired values
Line 2: 16 fi gures for menu text
P
Program key and open menu
▼
Menu selection, reduce value
▲
Menu selection, increase value
▼ + ▲
ESC-key combination, Escape = leave menu
Messages on the display
OFF
No enable
!
Exceeding measuring range
Moon symbol = Adjustment for Setpoint 2 active
Hourerglass symbol = Timer function active
External error
External fault alarm
Limit Uout
Limit: Modulation
Limit Temp.
Limit: Temperature
Check Temp Sens
Failure: Check temperature sensor
Operating Instructions UNIcon CTG-150AVC Multipurpose LC display and key-
board
L-BAL-E287-GB 2015 Index 004 Part.-No.
12/36