1.4 Exclusion of liability
Concurrence between the contents of these assembly instructions and the described
hardware and software in the device has been examined. It is still possible that non-
compliances exist; no guarantee is assumed for complete conformity. To allow for future
developments, construction methods and technical data given are subject to alteration.
We do not accept any liability for possible errors or omissions in the information con-
tained in data, illustrations or drawings provided.
ZIEHL-ABEGG SE is not liable for damage due to misuse, improper use or as a
consequence of unauthorized repairs or modi
fi
cations.
1.5 Copyright
These assembly instructions contain copyright protected information. The assembly
instructions may be neither completely nor partially photocopied, reproduced, translated
or put on data medium without previous explicit consent from ZIEHL-ABEGG SE. In-
fringements are liable for damages. All rights reserved, including those that arise through
patent issue or registration on a utility model.
2 Safety instructions
2.1 Intended use
Attention!
•
The fans are only intended for the conveyance of air or mixtures similar to air.
•
Any other use above and beyond this is considered not for the intended purpose
unless agreed otherwise by contract. The manufacturer will not be liable for any
damage resulting from this. The individual or company using it bears the sole risk.
•
Built-in fans with VDE approval (see rating plate) are designed to be installed inside
devices and are not suitable for the direct mains connection.
•
Reading these document and complying with all contained instructions -especially the
safety noti
fi
cations contained therein -are considered part of intended use.
•
To consider is also the documentation of attached components.
2.2 Improper use
Improper use / reasonably foreseeable misuse
•
Conveyance of aggressive and explosive gaseous media.
•
Use in areas at risk of explosion for conveying gas, mist, vapours or mixtures of the
above.
•
Transfer of solids or solids content in the transfer medium.
•
Operation with iced up impellers.
•
Conveyance of abrasive or adhesive media.
•
Conveyance of liquid media.
Assembly instructions
ECblue
Safety instructions
L-BAL-F056-GB 2022/45 Index 005
Part.-No. 00700562-GB
6/44
