•
You must periodically examine the safety equipment for their properly functioning
condition.
•
The assembly instructions and/or operating instructions are always readily available
at the location where the device is being used, are complete and are in legible
condition.
•
These persons are regularly instructed in all applicable questions regarding occupa-
tional safety and environmental protection and are knowledgeable regarding the
assembly instructions and/or operating instructions and, especially, are familiar with
the safety instructions contained therein.
•
All safety and warning notices attached to the device are never removed and remain
legible.
2.9 Employment of external personnel
Maintenance and service work are frequently carried out by external employees who
often do not recognize the speci
fi
c situations and the thus resulting dangers.These
persons must be comprehensively informed about the hazards in their area of activity.
You must monitor their working methods in order to intervene in good time if necessary.
3 Product overview
3.1 Area of application/Notes on use
The fans / motors are not ready-for-use products, but conceived as components for
ventilation systems (type designation see rating plate).
The fans may not be operated until they are installed in line with their intended use. The
supplied and certi
fi
ed guard grille of ZIEHL-ABEGG SE fans is designed in accordance
with DIN EN ISO 13857 Table 4 (from the age of 14 up). In the event of deviations,
further structural protective measures must be taken for safe operation.
•
Any use below -10
°
C is dependent on not being subjected to unusual, sudden or
mechanical loads or stresses on the material (see minimal permissible ambient
temperature).
•
Corrosion is possible at the cutting edges on sendzimir galvanised parts.
Attention!
If the motor/fan is used in applications where a ignitable atmosphere can form in the
event of a fault, e.g. due to leakage, the user must assess the risks of ignition and take
appropriate precautions to prevent ignition.
3.2 Functional description
ECblue stands for EC fans and motors with maximum e
ffi
ciency. Highly e
ffi
cient, elec-
tronically commutated motors with permanent magnets are used the speed of which is
controlled by the integrated controller.
The devices are constructed in accordance with the general requirement in EN 61800-2
for adjustable speed electrical power systems and is intended for one-quadrant drives.
Assembly instructions
ECblue
Product overview
L-BAL-F056-GB 2022/45 Index 005
Part.-No. 00700562-GB
10/44
