2.6
Work on the device
Information
Mounting, electrical connection, and start-up operation may only be carried out by an electrical
specialist in accordance with electrotechnical regulations (e.g. EN 50110 or EN 60204)!
Danger due to electric current
It is generally forbidden to carry out work on electrical live parts. Protection class of the device when
open is IP00! It is possible to touch hazardous voltages directly.
The safe isolation from the supply must be checked using a
two-pole
voltage detector.
2.7
Modi
fi
cations / interventions in the device
Attention!
For reasons of safety, no unauthorized interventions or modi
fi
cations may be made on the device. All
planned modi
fi
cations must be authorized by the manufacturer in writing.
Use only genuine spare parts / genuine wearing parts / genuine accessories from ZIEHL-ABEGG.Th-
ese parts were speci
fi
cally designed for the device. There is no guarantee that parts from non-original
sources are designed and manufactured in correspondence with load and safety requirements.
Parts and optional equipment not supplied by ZIEHL-ABEGG are not approved by ZIEHL-ABEGG for
use.
2.8
Operator
’
s obligation of diligence
•
The contractor or owner must also ensure that the electric systems and equipment are operated
and maintained in accordance with electro-technical regulations.
•
The owner is obliged to ensure that the device is operated in perfect working order only.
•
The device may only be used as intended (
“
area of application
”
).
•
You must periodically examine the safety equipment for their properly functioning condition.
•
The assembly instructions and/or operating instructions are always readily available at the location
where the device is being used, are complete and are in legible condition.
•
These persons are regularly instructed in all applicable questions regarding occupational safety
and environmental protection and are knowledgeable regarding the assembly instructions and/or
operating instructions and, especially, are familiar with the safety instructions contained therein.
•
All safety and warning notices attached to the device are never removed and remain legible.
2.9
Employment of external personnel
Maintenance and service work are frequently carried out by external employees who often do not
recognize the speci
fi
c situations and the thus resulting dangers.These persons must be comprehen-
sively informed about the hazards in their area of activity.
You must monitor their working methods in order to intervene in good time if necessary.
3
Product overview
3.1
Operational area
Alarm device for monitoring up to 32 cots. The temperature measurement is made directly by a
maximum of 4 connected temperature sensor add-on modules of type ZTG-8L (for max. 8 sensors
each) or indirectly by the temperature sensors of networked ventilation devices (maximum 32 pcs.).
Two separate sensors, the measured values of which have been checked for plausibility, must be
used for the supply air temperature and per cot for as high operational reliability as possible.
Attention!
In animal keeping, the comfort of the animals must be checked additionally especially during critical
weather conditions (high humidity and close heat)!
Operating Instructions
ALARMcon
–
model series UTE-32A-L
Product overview
L-BAL-E251-GB 1542 Index 002
Part.-No. 00163281
6/44
