Ziegler mfm 3480, User Manual

Page: 31 / 78

Touch on “ key” will confirm the setting.
Touching the “ key” will keep the old selected setting and will return to previous menu.
OK
BACK
LINE-NEUTRAL VOLTAGE
VOLTAGE MAIN
VL2
VL2
VL2
VL2
V
V V
V
V 0.000
0.000
0.000
LINE-NEUTRAL VOLTAGE
VOLTAGE MAIN
VL2
VL2
VL2
VL2
V
V V
V
V 0.000
0.000
0.000
LINE-NEUTRAL VOLTAGE
VOLTAGE MAIN
VL2
VL2
VL2
VL2
V
V V
V
V 0.000
0.000
0.000
CT SECONDARY
OK
5 AMPERE
1 AMPERE
LINE-NEUTRAL VOLTAGE
VOLTAGE MAIN
VL2
VL2
VL2
VL2
V
V V
V
V 0.000
0.000
0.000
LINE-NEUTRAL VOLTAGE
VOLTAGE MAIN
VL2
VL2
VL2
VL2
V
V V
V
V 0.000
0.000
0.000
LINE-NEUTRAL VOLTAGE
VOLTAGE MAIN
VL2
VL2
VL2
V
V V
V
V 0.000
0.000
0.000
IMPORTANT.
Performing touch
screen calibration.
Press & hold the center
of the filled circle
Touch screen to
continue.
3.2.4.4 Analog Output 2 ( Optional ) Parameter setting for
This option allows the user to set analog output to corresponding measured parameter.
simple touch on “ANALOG-2”row will open screen having list of parameters.( Refer table2
“ Parameter for Analog & Limit output ”) 2 A
3.2.5 Brightness & Contrast
The brightness & contrast of the TFT LCD screen can be varied by
OK
Touching the DEFAULT key will set brightness and contrast as per
factory settings. Touching the BACK key will move back to the
setup menu without making any changes.
the user by sliding the sliders. Touching the “ key” will
confirm the current brightness contrast setting.
LINE-NEUTRAL VOLTAGE
VOLTAGE MAIN
VL2
VL2
VL2
VL2
V
V V
V
V 0.000
0.000
LINE-NEUTRAL VOLTAGE
VOLTAGE MAIN
VL2
VL2
VL2
VL2
V
V V
V
V 0.000
0.000
VOLTAGE MAIN
BRIGHTNESS & CONTRAST
BACK
DEFAULT OK
DEFAULT CONTRAST
BRIGHTNESS
29
4 Touch screen calibration
This is able to perform calibration to ensure the proper operation of the units
touch screen functionalities. The calibration procedure will correct the problem of out of
tolerance touch screen malfunction. Note that errors corrected by this calibration
procedure are specific only to touch screen operation.
instrument
For starting touch screen calibration, touch the screen any where
for 1 sec at system reset. After that touch screen calibration will
start & the message shown besides will be displayed. Touch the
screen to continue.