Ziegler mfm 3480, User Manual

Page: 27 / 78

3.2.4.1.2 Limit output
This screen is for Limit output mode selection. It allows the user to set Limit output
corresponding measured value. After entering in Limit Output first time(was disabled previously),
only “PARAMETER:” is displayed on screen. Now a simple touch on “PARAMETER:” will open
list of parameters, Refer Table 2 “Parameter for Analog & Limit output” for assignment.
Now after assignment of any parameter, list of following setting parameters will be displayed:-
3.2.4.1.2.1 PARAMETER
3.2.4.1.2.2 CONFIG
3.2.4.1.2.3 TRIP POINT
3.2.4.1.2.4 HYSTERESIS POINT
3.2.4.1.2.5 ENERGIZING DELAY
3.2.4.1.2.6 DE-ENERGIZING DELAY
3.2.4.1.1.2.2 Limit1 Configuration select
This screen is used to set the Limit1 Configuration, four different types of configuration can be selected
HIGH ALARM & ENERGIZED RELAY
HIGH ALARM & DE-ENERGIZED RELAY
LOW ALARM & ENERGIZED RELAY
LOW ALARM & DE-ENERGIZED RELAY
(For detail refer to section 9.2)
Touching radio button in front of particular type will select that type.
Touch on “ key” will confirm the setting.
Touching the “ key” will keep the old selected setting and will return to previous menu.
OK
BACK
LINE-NEUTRAL VOLTAGE
VL2
VL2
VL2
VL2
LINE-NEUTRAL VOLTAGE
VL2
VL2
VL2
VL2
LINE-NEUTRAL VOLTAGE
VL2
VL2
VL2
VL2
CT SECONDARY
5 AMPERE
1 AMPERE
LINE-NEUTRAL VOLTAGE
VL2
VL2
VL2
VL2
LINE-NEUTRAL VOLTAGE
VL2
VL2
VL2
VL2
LINE-NEUTRAL VOLTAGE
VL2
VL2
VL2
VL2
RELAY-1 CONFIGURATION
HIGH ALARM & ENERGIZED RELAY
HIGH ALARM & DE-ENERGIZED RELAY
LOW ALARM & ENERGIZED RELAY
LOW ALARM & DE-ENERGIZED RELAY
MAIN MAIN MAIN MAIN MAIN MAIN OK BACK
25
3.2.4.1.2.1 Limit Parameter selection
This option allows the user to set Relay\-1 limit to corresponding measured parameter. A simple
touch on “PARAMETER” row will open screen having list of parameters. (Refer Table 2
“Parameters for Analog & limit output”)
Touch on “ key” will confirm the setting.
Touching the “ key” will keep the old selected setting and will return to previous menu.
OK
BACK